2011 Toyota Venza recalls
NHTSA lists 6 safety recall campaigns for the 2011 Toyota Venza. Between them they involve air bags, seats, equipment, lighting and power train. The most recent was received on April 13, 2021.
-
Air bags
Side Curtain Air Bags May Not Deploy
The defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2009-2015 Venza vehicles. The Supplemental Restraint System (SRS) wiring may become damaged with regular use of the driver-side door.
The risk: Damaged wires may cause the air bag sensor to become inoperable, preventing the deployment of the side and curtain air bags on the driver side and increasing the risk of injury during a crash.
The remedy: Dealers will inspect and, if necessary, replace the driver-side front door wire harness, free of charge. Owner notification letters were mailed October 19, 2021. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TB01/21TA01.
-
Seats
Seat Heater Electrical Wiring
The defect: Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring.
The risk: Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
The remedy: SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
-
Equipment
Inaccurate Load Carrying Capacity Labels
The defect: Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota Tacoma, 2011-2012 Toyota Sienna, 2012 Toyota Prius, 2013 Scion FR-S, 2011 Scion XD, 2011 Scion XB, and 2012 Scion TC vehicles. These vehicles were sold with labels that were outside the allowable one percent of accuracy of actual weight added. Thus, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety…
The risk: An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
The remedy: Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
-
Air bags
Occupant Sensing System Calibration
The defect: Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant…
The risk: If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
The remedy: Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
-
Lighting
Stop lamp switch
The defect: Toyota is recalling certain model year 2009 camry vehicles manufactured from july 1, 2008, through february 28, 2009, and model year 2009-2011 venza vehicles manufactured from october 20, 2008, through january 4, 2011. During assembly of the contact-type stop lamp switch, silicone grease may have come in contact with the surface of the switch which could cause contact resistance. If this occurs, warning lamps could illuminate, a no start condition could result, the shift lever may not shift from the park position, or the vehicles brake lights could become inoperative.
The risk: Inoperative brake lights would not warn other drivers that the vehicle is slowing or stopping, increasing the risk of a crash.
The remedy: Toyota will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on april 12, 2012. Owners may contact toyota at 1-800-331-4331.
-
Power train
Drive shaft breaks
The defect: Toyota is recalling certain model year 2011 venza and sienna passenger cars manufactured from march 7, through march 10, 2011. There is a possibility that the front, right, drive shaft may break due to insufficient heat treatment.
The risk: Should the drive shaft break during vehicle operation, the vehicle will lose power without prior warning. Loss of motive power without warning may increase the risk of a crash.
The remedy: Toyota will notify owners and dealers will inspect the drive shaft, and, if the drive shaft is identified as one that may not have been correctly manufactured, it will be replaced with a new one at no charge. The safety recall began on june 22, 2011. Owners may contact toyota at 1-800-331-4331.
Check by VIN
A campaign rarely covers every Venza built in 2011. Enter your 17-character VIN to find the recall campaigns filed for your make, model and model year. The VIN is on the driver’s side of the dashboard (visible through the windshield), on the door-jamb label, and on your registration and insurance documents.
Is a recall still open on your vehicle? Only NHTSA’s official VIN check can say whether a campaign applies to your exact vehicle and whether the repair has already been done.
Your VIN is decoded with NHTSA’s public vPIC service to identify the make, model and year. It is not stored and is not added to any page address.
What 2011 Toyota Venza owners should do
- Check your VIN on NHTSA’s lookup to see which of these campaigns apply to your vehicle and whether any are still open.
- Call a Toyota dealer and book the repair, quoting the campaign numbers.
- If you have bought the vehicle used, the recall still applies: the repair is free whoever owns the vehicle now.
- Make sure your current address is on file with the manufacturer so the owner letters reach you.
Other Toyota Venza model years
Common questions
Does the 2011 Toyota Venza have any recalls?
Yes. NHTSA lists 6 campaigns for the 2011 Toyota Venza: 21V-257 (Side Curtain Air Bags May Not Deploy); 14V-743 (Seat Heater Electrical Wiring); 13V-123 (Inaccurate Load Carrying Capacity Labels); 13V-014 (Occupant Sensing System Calibration); and 2 more.
How do I know if my 2011 Toyota Venza has an open recall?
Enter your VIN in NHTSA’s recall lookup. Most campaigns cover only part of a model year’s production, and the lookup also shows whether the repair has already been done on your vehicle.
Will the dealer charge to fix the 2011 Toyota Venza?
No. Safety recall repairs are done free of charge by Toyota dealers. Quote the NHTSA campaign number when you book.