2021 Subaru Ascent recalls
NHTSA lists 2 safety recall campaigns for the 2021 Subaru Ascent. Between them they involve equipment and electrical system. The most recent was received on July 7, 2026.
Safety advisory on one campaign
- Park outside: campaign 22V-907 — Improperly Fastened Ground Bolts May Cause Fire
-
Equipment
Incorrect Weight Rating on Label/FMVSS 110
The defect: Subaru of America, Inc. (Subaru) is recalling certain 2026 Crosstrek Hybrid, 2025-2026 Forester Hybrid, Forester, and 2019-2026 Ascent vehicles. These vehicles were manufactured with an incorrect Gross Axle Weight Rating (GAWR) on the certification label. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) 110, "Tire selection and rims."
The risk: An incorrect GAWR label may lead to an overloaded vehicle, increasing the risk of a crash.
The remedy: Subaru will mail a new certification label to owners, free of charge. Owners may also choose to have a dealer install the new label, free of charge. Letters informing owners of the safety risk were mailed August 27, 2026. Additional letters will be mailed once the remedy is available. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRH-26.
-
Electrical systemPark outside
Improperly Fastened Ground Bolts May Cause Fire
The defect: Subaru of America, Inc. (Subaru) is recalling certain 2019-2022 Ascent vehicles. The ground bolt that secures the ground terminal of the Positive Temperature Coefficient (PTC) heater may have been improperly fastened, which could result in melting of the ground terminal and surrounding components.
The risk: A melting ground terminal increases the risk of a fire.
The remedy: Owners are advised to park their vehicle away from structures and to avoid leaving the vehicle unattended while the engine is running. An owner who notices or smells smoke coming from the dash or driver's footwell area should immediately stop operating the vehicle and turn the ignition switch to the "Off" position. Dealers will replace the PTC heater ground bolts and if necessary, replace the ground wire and the connector holder, free of charge. Owner notification letters are expected to be mailed February 6, 2023. Owners may contact Subaru's customer service at 1-844-373-6614. Subaru's…
Check by VIN
A campaign rarely covers every Ascent built in 2021. Enter your 17-character VIN to find the recall campaigns filed for your make, model and model year. The VIN is on the driver’s side of the dashboard (visible through the windshield), on the door-jamb label, and on your registration and insurance documents.
Is a recall still open on your vehicle? Only NHTSA’s official VIN check can say whether a campaign applies to your exact vehicle and whether the repair has already been done.
Your VIN is decoded with NHTSA’s public vPIC service to identify the make, model and year. It is not stored and is not added to any page address.
What 2021 Subaru Ascent owners should do
- Check your VIN on NHTSA’s lookup to see which of these campaigns apply to your vehicle and whether any are still open.
- Call a Subaru dealer and book the repair, quoting the campaign numbers (26V-436, 22V-907).
- If you have bought the vehicle used, the recall still applies: the repair is free whoever owns the vehicle now.
- Make sure your current address is on file with the manufacturer so the owner letters reach you.
Other Subaru Ascent model years
Common questions
Does the 2021 Subaru Ascent have any recalls?
Yes. NHTSA lists 2 campaigns for the 2021 Subaru Ascent: 26V-436 (Incorrect Weight Rating on Label/FMVSS 110); 22V-907 (Improperly Fastened Ground Bolts May Cause Fire).
How do I know if my 2021 Subaru Ascent has an open recall?
Enter your VIN in NHTSA’s recall lookup. Most campaigns cover only part of a model year’s production, and the lookup also shows whether the repair has already been done on your vehicle.
Is it safe to drive the 2021 Subaru Ascent?
Campaign 22V-907 carries a “park outside” advisory. If your VIN is included in that campaign, follow the advisory until the repair is done.