Class II U.S. Food and Drug Administration

Medtronic MiniMed, Inc. MiniMed 780G Insulin Pump, REF: MMT-1885, MMT-1886 recall: A software anomaly can occur when the pump is paired with the Instinct

Recall published 3 months ago

A software anomaly can occur when the pump is paired with the Instinct sensor. Under certain circumstances, the pump unexpectedly stops delivering insulin and displays two error messages back-to-back: Pump Error 53 followed immediately by Pump Error 23. Insulin delivery will stop which may lead to delayed therapy and an increased risk of hyperglycemia or diabetic ketoacidosis (DKA).

The hazard: Device malfunction

This is a device recall, and in FDA language that usually means a correction rather than a removal: the device stays in use and the manufacturer fixes, patches or re-instructs.

What the notice says: A software anomaly can occur when the pump is paired with the Instinct sensor. Under certain circumstances, the pump unexpectedly stops delivering insulin and displays two error messages back-to-back: Pump Error 53 followed immediately by Pump Error 23. Insulin delivery will stop which may lead to delayed therapy and an increased risk of hyperglycemia or diabetic ketoacidosis (DKA).

Why it matters: The device may not perform as intended — a mechanical failure, a software defect, an inaccurate reading, or an alarm that does not sound. For a device someone depends on, the consequence of the failure is usually worse than the failure itself.

Symptoms and when to call a doctor

If the device supports a vital function, do not disable or remove it on your own judgement. Contact the clinician who prescribed or fitted it, and use the back-up arrangement they gave you. Go to an emergency department if the symptoms the device is meant to manage are getting worse, or if an implanted device gives an unexpected alarm or shock.

This page is general information, not medical advice. If you feel unwell, a clinician who can see you is the only person able to judge your case.

Recall details

Recall number
Z-2698-2026
Published
July 15, 2026
Risk level
Class II
Status
Ongoing
Issued by
U.S. Food and Drug Administration
Brand
Medtronic MiniMed, Inc.
Product type
Medical devices
Units affected
778
Made in
United States
Lot / code info
UDI-DI/GTIN: A7630006392701, 00763000521554, 00763000639273, A7630006392301, 00199150035687, A7630007325603, A7630007325601, 00763000639235, A7630007325604, 00763000384289, 00763000521530, A7630007325401, 00763000521547, A7630006392601, A7630006392201, 00763000639228, 00199150035663, 00763000639266, A7630007325404, 00199150035694, 00763000442194, A7630007325403, 00763000521523. Software version 6.62
UPC codes
7630006392701, 00763000521554, 00763000639273, 7630006392301, 00199150035687, 7630007325603, 7630007325601, 00763000639235, 7630007325604, 00763000384289, 00763000521530, 7630007325401, 00763000521547, 7630006392601, 7630006392201, 00763000639228, 00199150035663, 00763000639266, 7630007325404, 00199150035694

Products covered by this recall

MiniMed 780G Insulin Pump, REF: MMT-1885, MMT-1886, MMT-1895, MMT-1896

Check your product

The notice names 25 codes you can read straight off the package. Type the one printed on yours and the list below narrows to it.

UPC / barcode

Read the twelve digits under the barcode on the package.

  • 7630006392701
  • 00763000521554
  • 00763000639273
  • 7630006392301
  • 00199150035687
  • 7630007325603
  • 7630007325601
  • 00763000639235
  • 7630007325604
  • 00763000384289
  • 00763000521530
  • 7630007325401
  • 00763000521547
  • 7630006392601
  • 7630006392201
  • 00763000639228
  • 00199150035663
  • 00763000639266
  • 7630007325404
  • 00199150035694

Model or item number

On the rating label, the box or the instruction sheet.

  • MMT-1885
  • MMT-1886
  • MMT-1895
  • MMT-1896 — UDI-DI
  • GTI

Codes are lifted verbatim from the FDA — Device enforcement notice. A code that is missing here may still be covered — the official notice is the complete list.

What to do about Malfunction

Medtronic MiniMed, Inc. — This is a device recall, and in FDA language that usually means a correction rather than a removal: the device stays in use and the manufacturer fixes, patches or re-instructs.

  1. Match the model, catalogue, lot and serial numbers on your device against the identifiers listed on this page.
  2. Report device problems to the FDA through MedWatch — that database is where this recall came from.
  3. If the device is implanted, or you depend on it daily, speak to your clinician before changing anything about how you use it.
  4. Check whether the remedy is a software update, and if so confirm afterwards in the device menu that the version actually changed.

Replacements, repairs and reimbursement

Device remedies run through the supply chain, so the route depends on who sold you the unit.

  • Contact the distributor or clinic named on your paperwork and quote the recall number on this page. They will tell you whether the remedy is a repair, a replacement or an instruction update.
  • If the device was billed to insurance or Medicare, the replacement is usually billed the same way; you should not face a second deductible for a recall.
  • Keep every piece of correspondence. If a recalled device caused harm, that paper trail is what a claim rests on.
  • Consumer-purchased devices such as monitors and test kits are normally replaced free, with return shipping paid.

Company contact: Medtronic MiniMed, Inc. — 18000 Devonshire St, Northridge, CA, 91325-1219

The official notice

This page summarises a notice published by U.S. Food and Drug Administration. The agency notice is the authoritative version — read it before you act, and treat it as the final word if anything here looks different.

Open the FDA — Device enforcement record U.S. Food and Drug Administration recalls

Questions people ask about this recall

Why was Medtronic MiniMed, Inc. medical devices recalled?

A software anomaly can occur when the pump is paired with the Instinct sensor. Under certain circumstances, the pump unexpectedly stops delivering insulin and displays two error messages back-to-back: Pump Error 53 followed immediately by Pump Error 23. Insulin delivery will stop which may lead to delayed therapy and an increased risk of hyperglycemia or diabetic ketoacidosis (DKA). A software anomaly can occur when the pump is paired with the Instinct sensor. Under certain circumstances, the pump unexpectedly stops delivering insulin and displays two error messages back-to-back: Pump Error…

How do I know if I have the recalled product?

Match the codes printed on your package against the notice: UPC 7630006392701, 00763000521554, 00763000639273; model number MMT-1885, MMT-1886, MMT-1895. If the code on your package is not on that list, your unit is outside the recall.

What should I do with it right now?

Match the model, catalogue, lot and serial numbers on your device against the identifiers listed on this page.

Can I get my money back?

Contact the distributor or clinic named on your paperwork and quote the recall number on this page. They will tell you whether the remedy is a repair, a replacement or an instruction update.

Related recalls