2011 Toyota Camry recalls
NHTSA lists 5 safety recall campaigns for the 2011 Toyota Camry. Between them they involve seats, suspension, equipment and air bags. The most recent was received on November 19, 2014.
-
Seats
Seat Heater Electrical Wiring
The defect: Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring.
The risk: Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
The remedy: SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
-
Suspension
Premature Ball Joint Wear
The defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.
The risk: A loosened ball joint may separate from the knuckle and could cause a loss of vehicle control, increasing the risk of a crash.
The remedy: Toyota will notify owners, and dealers will inspect and replace the ball joint, free of charge. The recall began on December 16, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
-
Equipment
Inaccurate Load Carrying Capacity Labels
The defect: Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota Tacoma, 2011-2012 Toyota Sienna, 2012 Toyota Prius, 2013 Scion FR-S, 2011 Scion XD, 2011 Scion XB, and 2012 Scion TC vehicles. These vehicles were sold with labels that were outside the allowable one percent of accuracy of actual weight added. Thus, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety…
The risk: An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
The remedy: Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
-
Air bags
Occupant Sensing System Calibration
The defect: Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant…
The risk: If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
The remedy: Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
-
Equipment
Load carrying capacity modification labels
The defect: Southeast toyota is recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
The risk: A driver may overload a vehicle which may increase the risk of a crash.
The remedy: Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. The safety recall began on may 27, 2010. Owners may contact southeast toyota at 1-800-301-6859.
Check by VIN
A campaign rarely covers every Camry built in 2011. Enter your 17-character VIN to find the recall campaigns filed for your make, model and model year. The VIN is on the driver’s side of the dashboard (visible through the windshield), on the door-jamb label, and on your registration and insurance documents.
Is a recall still open on your vehicle? Only NHTSA’s official VIN check can say whether a campaign applies to your exact vehicle and whether the repair has already been done.
Your VIN is decoded with NHTSA’s public vPIC service to identify the make, model and year. It is not stored and is not added to any page address.
What 2011 Toyota Camry owners should do
- Check your VIN on NHTSA’s lookup to see which of these campaigns apply to your vehicle and whether any are still open.
- Call a Toyota dealer and book the repair, quoting the campaign numbers.
- If you have bought the vehicle used, the recall still applies: the repair is free whoever owns the vehicle now.
- Make sure your current address is on file with the manufacturer so the owner letters reach you.
Other Toyota Camry model years
- 2023 2
- 2022 1
- 2021 1
- 2020 3
- 2019 6
- 2018 8
- 2017 3
- 2016 2
- 2015 1
- 2014 3
- 2013 2
- 2012 2
- 2010 9
- 2009 10
- 2008 7
- 2007 9
- 2006 5
- 2005 5
- 2004 3
- 2003 1
- 2002 4
- 2001 2
- 2000 2
- 1999 1
- 1998 2
- 1997 3
Common questions
Does the 2011 Toyota Camry have any recalls?
Yes. NHTSA lists 5 campaigns for the 2011 Toyota Camry: 14V-743 (Seat Heater Electrical Wiring); 14V-732 (Premature Ball Joint Wear); 13V-123 (Inaccurate Load Carrying Capacity Labels); 13V-014 (Occupant Sensing System Calibration); and 1 more.
How do I know if my 2011 Toyota Camry has an open recall?
Enter your VIN in NHTSA’s recall lookup. Most campaigns cover only part of a model year’s production, and the lookup also shows whether the repair has already been done on your vehicle.
Will the dealer charge to fix the 2011 Toyota Camry?
No. Safety recall repairs are done free of charge by Toyota dealers. Quote the NHTSA campaign number when you book.