2009 Scion Xd recalls
NHTSA lists 6 safety recall campaigns for the 2009 Scion Xd. Between them they involve visibility, seats, equipment and brakes. The most recent was received on October 22, 2015.
-
Visibility
Power Window Master Switch may Melt
The defect: Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.
The risk: If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
The remedy: Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
-
Seats
Seat Rail Spring Failure
The defect: Toyota is recalling certain model year 2006-2010 Yaris vehicles manufactured August 22, 2005, through May 12, 2010, and 2008-2010 Scion xD vehicles manufactured April 4, 2007, through May 12, 2010. In the affected vehicles, the springs used for the seat rails on the driver's seat and the seat rails of the front passenger seat of three-door models may break.
The risk: If the spring breaks, the seat may not lock in position. In the event of a vehicle crash, the seat could move increasing the risk of injury to the seat occupant.
The remedy: Toyota will notify owners, and dealers will inspect the seat rail, and replace it with a new one, if necessary, free of charge. The recall began on July 3, 2014. Owners may contact Toyota at 1-800-331-4331.
-
Visibility
Power Window Master Switch may Melt
The defect: Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.
The risk: If the switch overheats, it may melt, possibly resulting in a fire.
The remedy: Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their Toyota dealer or the Toyota Customer Experience Center at 1-800-331-4331. General Motors will contact the Pontiac Vibe owners affected by this recall and GM dealers will inspect and repair switches as necessary. Those owners may contact Pontiac Customer Care at 1-800-762-2737.
-
Equipment
Load carrying capacity modification labels
The defect: Southeast toyota is recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
The risk: A driver may overload a vehicle which may increase the risk of a crash.
The remedy: Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. The safety recall began on may 27, 2010. Owners may contact southeast toyota at 1-800-301-6859.
-
Equipment
Load carrying capacity modification labels
The defect: Gulf states toyota is recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
The risk: This does not meet the standard requirements.
The remedy: Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. The safety recall began on may 27, 2010. Owners may contact gulf states toyota at 713-580-3300.
-
Brakes
Brake vacuum suction port
The defect: Toyota is recalling certain model year 2008-2009 scion xd and my 2009-2010 corolla, and corolla matrix vehicles equipped with 1.8l engine and originally sold in or currently registered in the states of alaska, colorado, idaho, illinois, iowa, kansas, maine, michigan, minnesota, montana, nebraska, nevada, new hampshire, new york, north dakota, south dakota, vermont, wisconsin, and wyoming. When driving under certain unique conditions in extremely low ambient temperatures, the intake manifold suction port for the brake vacuum can become blocked due to the freezing of condensation resulting from positive crankcase ventilation.
The risk: This could lead to an increase in vehicle stopping distance and a crash could occur.
The remedy: Dealers will install a newly designed intake air connector which will relocate the brake system vacuum port. This service will be performed free of charge. The recall began on september 21, 2009. Owners may contact toyota at 1-800-331-4331.
Check by VIN
A campaign rarely covers every Xd built in 2009. Enter your 17-character VIN to find the recall campaigns filed for your make, model and model year. The VIN is on the driver’s side of the dashboard (visible through the windshield), on the door-jamb label, and on your registration and insurance documents.
Is a recall still open on your vehicle? Only NHTSA’s official VIN check can say whether a campaign applies to your exact vehicle and whether the repair has already been done.
Your VIN is decoded with NHTSA’s public vPIC service to identify the make, model and year. It is not stored and is not added to any page address.
What 2009 Scion Xd owners should do
- Check your VIN on NHTSA’s lookup to see which of these campaigns apply to your vehicle and whether any are still open.
- Call a Scion dealer and book the repair, quoting the campaign numbers.
- If you have bought the vehicle used, the recall still applies: the repair is free whoever owns the vehicle now.
- Make sure your current address is on file with the manufacturer so the owner letters reach you.
Other Scion Xd model years
Common questions
Does the 2009 Scion Xd have any recalls?
Yes. NHTSA lists 6 campaigns for the 2009 Scion Xd: 15V-689 (Power Window Master Switch may Melt); 14V-169 (Seat Rail Spring Failure); 12V-491 (Power Window Master Switch may Melt); 10V-036 (Load carrying capacity modification labels); and 2 more.
How do I know if my 2009 Scion Xd has an open recall?
Enter your VIN in NHTSA’s recall lookup. Most campaigns cover only part of a model year’s production, and the lookup also shows whether the repair has already been done on your vehicle.
Will the dealer charge to fix the 2009 Scion Xd?
No. Safety recall repairs are done free of charge by Scion dealers. Quote the NHTSA campaign number when you book.