2018 Chrysler Pacifica recalls
NHTSA lists 12 safety recall campaigns for the 2018 Chrysler Pacifica. Between them they involve equipment, electrical system, rear-view camera, suspension and power train and other systems. The most recent was received on December 17, 2025.
-
Equipment
Wheelchair Restraint Retractor May Not Lock
The defect: Rollx Vans (Rollx) is recalling certain GMC Yukon, Sierra, Chevrolet Express 2500, Ford Transit, E-250, Toyota Sienna, Sienna Hybrid, Honda Odyssey, Chrysler Town and Country, Voyager, Pacifica, Dodge Grand Caravan, and Ram Promaster vehicles equipped with QRT-Deluxe and QRT-Max wheelchair restraints. Please refer to Rollx's recall report for specific model year information. The retractors may not lock, preventing the wheelchair from being properly secured.
The risk: An unsecured wheelchair can move during transit, increasing the risk of injury.
The remedy: Rollx will work with Q'Straint to inspect and replace the retractors as necessary, free of charge. Owner notification letters were mailed February 5, 2026. Owners may contact Rollx's customer service at 1-800-956-6668.
-
Electrical system
Unexpected Engine Shutdown from Electrical Short
The defect: Chrysler (FCA US, LLC) is recalling certain 2017-2023 Pacifica Plug-In Hybrid Electric vehicles (PHEVs). An internal transmission wiring connector may short circuit, resulting in an unexpected engine shutdown.
The risk: An unexpected engine shutdown can cause a loss of drive power, increasing the risk of a crash.
The remedy: Dealers will update the Power Inverter Module (PIM) software and, if necessary, update the instrument panel cluster (IPC) and the electronic control module (ECM) software, free of charge. FCA US will notify dealers and begin notifying owners on or about: 03/21/2023 for 2021 model year vehicles, 05/02/2023 for 2019-2020 model year vehicles, and 06/15/2023 for 2017-2018 model year vehicles. FCA began notifying owners on February 23, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 03A.
-
Rear-view camera
Rearview Image Can Remain on Radio Display
The defect: Chrysler (FCA US LLC) is recalling certain 2018-2019 Pacifica vehicles equipped with an 8.4 inch radio display, 360 degree surround view camera system, and seat back video screens. A software error can cause the rearview camera image to remain displayed on the radio after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
The risk: The lingering rearview image can distract the driver, increasing the risk of a crash.
The remedy: Chrysler will notify owners, and dealers will update the radio software, free of charge. The recall began January 9, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is VE2.
-
Electrical system
Engine Stall or Loss of Power Steering Assist
The defect: Chrysler (FCA US LLC) is recalling certain 2017-2019 Pacifica vehicles equipped with engine stop/start systems. A loose battery ground connection may result in an intermittent loss of power steering assist and/or a stall.
The risk: A loss of power steering assist or a stall can increase the risk of crash.
The remedy: Chrysler will notify owners, and dealers will inspect the battery ground surfaces, clean the contact surfaces as needed, and properly reassemble the ground connection, free of charge. The recall began May 24, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. FCA US' number for this recall is V53.
-
Suspension
Control Arm May Separate From Steering Knuckle
The defect: Chrysler (FCA US LLC) is recalling certain 2018 Chrysler Pacifica and Pacifica hybrid vehicles. The right front lower control arm may separate from the steering knuckle.
The risk: A control arm separation could increase the risk of a crash.
The remedy: Chrysler will notify owners, and dealers will inspect the right front knuckle and lower control arm for damage, replacing the components as necessary. The right front lower control arm knuckle pinch bolt will be replaced with a larger-diameter pinch bolt. These repairs will be performed free of charge. The recall began April 26, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V15.
-
Electrical system
Voltage Regulator may Fail and Cause Stall
The defect: Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.
The risk: A vehicle stall can increase the risk of a crash.
The remedy: Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.
-
Power train
Axle Shaft May Disengage Causing Loss of Drive
The defect: Chrysler (FCA US LLC) is recalling certain 2018 Chrysler Pacifica vehicles. The front axle halfshafts may have been incorrectly assembled, preventing the shaft from being properly secured to the constant-velocity (CV) joint.
The risk: If the axle shaft disengages from the CV joint, the vehicle will have a loss of drive or allow the vehicle to move while in the "Park" position. Either condition may increase the risk of a crash.
The remedy: Chrysler will notify owners, and dealers will replace the left or right halfshaft assembly, free of charge. The recall began September 18, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U80.
-
Power train
Loss of Drive from Incomplete Transmission Weld
The defect: Chrysler (FCA US LLC) is recalling certain 2019 Jeep Cherokee vehicles and 2018 Chrysler Pacifica non-hybrid vehicles. A component in the transmission may not have been welded properly, possibly causing the transmission to not transmit engine power to the wheels.
The risk: If the transmission weld fails, the vehicle will stop moving, increasing the risk of a crash.
The remedy: Chrysler will notify owners, and dealers will replace the transmission, free of charge. The recall is expected to begin September 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U85.
-
Electrical system
Unintentional Vehicle Movement/FMVSS 114
The defect: Chrysler (FCA US LLC) is recalling certain 2017-2018 Chrysler Pacifica vehicles. The Manual Park Release (MPR) plug may be removed without a tool. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 114, "Theft Protection."
The risk: If the MPR is engaged unintentionally, the vehicle could roll away striking and injuring a bystander or cause a crash.
The remedy: Chrysler will notify owners, and dealers will replace the MPR plug, free of charge. The recall began July 9, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U50.
-
Electrical system
Cruise Control cannot be Cancelled
The defect: Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by…
The risk: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
The remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
-
Equipment
Fire Extinguisher May Be Clogged or Inoperable
The defect: Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit…
The risk: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
The remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
-
Seat belts
Second Row Left Seat Belt may be Unlatched
The defect: Chrysler (FCA US LLC) is recalling certain 2017-2018 Chrysler Pacifica vehicles equipped with the 8-passenger seating option. In certain passenger seating and vehicle situations, the second-row center seating position seat belt buckle could cause the left outboard seat belt to become unlatched.
The risk: Inadvertent unlatching of the left outboard seat belt can increase the risk of injury in the event of a crash.
The remedy: Chrysler will notify owners, and dealers will install a shorter second-row seat belt buckle, free of charge. The recall began October 26, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T54.
Check by VIN
A campaign rarely covers every Pacifica built in 2018. Enter your 17-character VIN to find the recall campaigns filed for your make, model and model year. The VIN is on the driver’s side of the dashboard (visible through the windshield), on the door-jamb label, and on your registration and insurance documents.
Is a recall still open on your vehicle? Only NHTSA’s official VIN check can say whether a campaign applies to your exact vehicle and whether the repair has already been done.
Your VIN is decoded with NHTSA’s public vPIC service to identify the make, model and year. It is not stored and is not added to any page address.
What 2018 Chrysler Pacifica owners should do
- Check your VIN on NHTSA’s lookup to see which of these campaigns apply to your vehicle and whether any are still open.
- Call a Chrysler dealer and book the repair, quoting the campaign numbers.
- If you have bought the vehicle used, the recall still applies: the repair is free whoever owns the vehicle now.
- Make sure your current address is on file with the manufacturer so the owner letters reach you.
Other Chrysler Pacifica model years
Common questions
Does the 2018 Chrysler Pacifica have any recalls?
Yes. NHTSA lists 12 campaigns for the 2018 Chrysler Pacifica: 25V-876 (Wheelchair Restraint Retractor May Not Lock); 23V-010 (Unexpected Engine Shutdown from Electrical Short); 19V-886 (Rearview Image Can Remain on Radio Display); 19V-348 (Engine Stall or Loss of Power Steering Assist); and 8 more.
How do I know if my 2018 Chrysler Pacifica has an open recall?
Enter your VIN in NHTSA’s recall lookup. Most campaigns cover only part of a model year’s production, and the lookup also shows whether the repair has already been done on your vehicle.
Will the dealer charge to fix the 2018 Chrysler Pacifica?
No. Safety recall repairs are done free of charge by Chrysler dealers. Quote the NHTSA campaign number when you book.