Elevated risk U.S. Food and Drug Administration

Olympus ViziShot 2 Flex Ebus -Tbna needles recall: Device Components May Detach During Procedures

Recall published 1+ years ago

Device Components May Detach During Procedures

The hazard: Device safety concern

The manufacturer or the FDA identified a problem with this device. The model, lot and catalogue numbers are what define the scope.

What the notice says: Device Components May Detach During Procedures

Why it matters: The FDA recorded an enforcement action against this device. Most device recalls are corrections rather than removals, so the device often stays in use while the manufacturer issues a fix.

Recall details

Published
September 19, 2025
Risk level
Elevated risk
Issued by
U.S. Food and Drug Administration
Brand
Olympus
Product type
Medical devices

Products covered by this recall

ViziShot 2 FLEX (19G) EBUS -TBNA needles

What the company announced

CENTER VALLEY, Pa., (September 19, 2025) — Olympus Corporation has announced a voluntary, global medical device removal action for ViziShot 2 FLEX (19G) EBUS -TBNA needles (“ViziShot 2 FLEX”) manufactured prior to May 12, 2025, after receiving reports of device components detaching during procedures.

The ViziShot 2 FLEX is protected by a hypotube and sheath. The hypotube protects the sheath from the needle tip and provides stability during transit and insertion. If damage to the sheath has occurred and the device continues to be used, the hypotube has the potential to eject from the device along with detached plastic components, which are not radiopaque. Damage may also occur during the manufacturing process. To improve the detection of device damage at the point of manufacturing, Olympus implemented an automated inspection procedure during assembly, a step that had been conducted previously through visual inspection.

Olympus assessed the issue after receiving complaints of adverse events involving patient injury, and one death. Potential consequences of a detached component of the ViziShot 2 FLEX include the risk of unintended device components within the tracheobronchial tree that may require bronchoscopic extraction or surgical removal.

Olympus notified customers about the issue and requested that customers quarantine devices manufactured before the automated inspection procedure was implemented. Customers are instructed to return affected lots to Olympus by following instructions provided in the global medical device removal action communication. Further, Olympus reinforced existing cautions and warnings contained in the Instructions for Use related to detecting any potential device damage that might lead to component ejection. Patient safety, and addressing potential risks, are our top priorities.

The ViziShot 2 FLEX is designed to be used with ultrasound endoscopes for ultrasound guided fine needle aspiration (FNA) and fine needle biopsy (FNB) of submucosal and extramural lesions of the tracheobronchial tree.

Health care personnel treating patients using an Olympus ViziShot 2 FLEX must ensure they are not using product from the affected lots, which are those manufactured prior to May 12, 2025.

Olympus does not provide recommendations for medical care in patients who were treated with the impacted devices beyond recommending the standard post-procedural care required of patients undergoing these types of procedures. However, users of this device should note that for patients with abnormal symptoms or image findings post-procedure, the potential for unanticipated retained device components should be assessed. It is notable that some of these components are not radiopaque.

Other EBUS-TBNA needles are not affected by this action.

Adverse reactions or quality problems experienced with the use of this product may be reported to the FDA's MedWatch program online: https://www.fda.gov/safety/medwatch-fda-safety-information-and-adverse-event-reporting-program/reporting-serious-problems-fda .

For information or to report a problem about the device, please contact the Olympus Technical Assistance Center at 1-800-848-9024, Option 1 or email [email protected] .

Reproduced from the company announcement posted on fda.gov. Links and contact forms in the original are not repeated here; the official notice below has them.

What to do about Device

Olympus — The manufacturer or the FDA identified a problem with this device. The model, lot and catalogue numbers are what define the scope.

  1. Match the model, catalogue, lot and serial numbers on your device against the identifiers on this page.
  2. Ask the supplier or clinic that provided it what the remedy is in your case.
  3. If you are a facility, quarantine affected stock and log the correction.
  4. Report device problems to the FDA through MedWatch.

Who pays for a device recall

The manufacturer funds the remedy. The practical question is usually which link in the chain executes it.

  • If a clinic fitted or supplied the device, start there — they hold the serial-number records the manufacturer needs.
  • Ask for written confirmation that the remedy was applied to your serial number. That is what an insurer or a future clinician will want to see.
  • If you bought it yourself online or from a pharmacy, go to the manufacturer’s recall page rather than the retailer; device claims are handled centrally.
  • Where the remedy is a software update, there is nothing to claim, but do confirm the version changed afterwards.

Company contact: Olympus Corporation — Consumers: Olympus Technical Assistance Center, 1-800-848-9024, Option 1, [email protected]

The official notice

This page summarises a notice published by U.S. Food and Drug Administration. The agency notice is the authoritative version — read it before you act, and treat it as the final word if anything here looks different.

Open the FDA — Company recall announcements record U.S. Food and Drug Administration recalls

Questions people ask about this recall

Why was Olympus medical devices recalled?

Device Components May Detach During Procedures Device Components May Detach During Procedures

How do I know if I have the recalled product?

The notice does not publish package codes for this recall. Compare the product name, size and the purchase window against the official FDA — Company recall announcements record, and contact the company if you are unsure.

What should I do with it right now?

Match the model, catalogue, lot and serial numbers on your device against the identifiers on this page.

Can I get my money back?

If a clinic fitted or supplied the device, start there — they hold the serial-number records the manufacturer needs.

Related recalls