Olympus Corporation of the Americas OER-ELITE Endoscope Reprocessor Connecting Tubes recall: Potential for the Version 2 reprocessor connecting tube lock levers may fail
Potential for the Version 2 reprocessor connecting tube lock levers may fail prematurely.
The hazard: Device safety concern
The manufacturer or the FDA identified a problem with this device. The model, lot and catalogue numbers are what define the scope.
What the notice says: Potential for the Version 2 reprocessor connecting tube lock levers may fail prematurely.
Why it matters: The FDA recorded an enforcement action against this device. Most device recalls are corrections rather than removals, so the device often stays in use while the manufacturer issues a fix.
Recall details
- Recall number
- Z-1898-2026
- Published
- April 29, 2026
- Risk level
- Class II
- Status
- Ongoing
- Issued by
- U.S. Food and Drug Administration
- Brand
- Olympus Corporation of the Americas
- Product type
- Medical devices
- Units affected
- 9,757 units
- Distribution
- Nationwide
- Made in
- United States
- Lot / code info
- Model Number: MAJ-2110. UDI Number: 04953170404054. Lot Numbers: 09A, 0XA, 0YA, 0ZA, 11A, 12A, 22A, 23A, 24A, 25A, 26A, 27A, 28A, 29A, 2XA, 2YA, 2ZA, 31A, 32A, 33A, 34A, 35A, 36A, 37A, 38A, 39A, 3XA, 3YA, 3ZA, 41A, 42A, 43A, 44A, 45A, 46A, 47A, 48A, 49A, 4XA, 4YA, 4ZA, 51A.
Products covered by this recall
OER-ELITE Endoscope Reprocessor Connecting Tubes. Model/Catalog Number: MAJ-2110. May be included with the Olympus OER-ELITE.
Check your product
The notice names 14 codes you can read straight off the package. Type the one printed on yours and the list below narrows to it.
Lot or batch code
Usually ink-stamped near the seam, the cap or the bottom of the pack.
- 09A
- 0XA
- 0YA
- 0ZA
- 11A
- 12A
- 22A
- 23A
- 24A
- 25A
- 26A
- 27A
- 28A
- 29A
Codes are lifted verbatim from the FDA — Device enforcement notice. A code that is missing here may still be covered — the official notice is the complete list.
What to do about Device
Olympus Corporation of the Americas — The manufacturer or the FDA identified a problem with this device. The model, lot and catalogue numbers are what define the scope.
- Match the model, catalogue, lot and serial numbers on your device against the identifiers on this page.
- If the device is implanted or you depend on it daily, speak to your clinician before changing how you use it.
- Ask the supplier or clinic that provided it what the remedy is in your case.
- If you are a facility, quarantine affected stock and log the correction.
Who pays for a device recall
The manufacturer funds the remedy. The practical question is usually which link in the chain executes it.
- If a clinic fitted or supplied the device, start there — they hold the serial-number records the manufacturer needs.
- Ask for written confirmation that the remedy was applied to your serial number. That is what an insurer or a future clinician will want to see.
- If you bought it yourself online or from a pharmacy, go to the manufacturer’s recall page rather than the retailer; device claims are handled centrally.
- Where the remedy is a software update, there is nothing to claim, but do confirm the version changed afterwards.
Company contact: Olympus Corporation of the Americas — 3500 Corporate Pkwy, Center Valley, PA, 18034-8229
The official notice
This page summarises a notice published by U.S. Food and Drug Administration. The agency notice is the authoritative version — read it before you act, and treat it as the final word if anything here looks different.
Open the FDA — Device enforcement record U.S. Food and Drug Administration recalls
Questions people ask about this recall
Why was Olympus Corporation of the Americas medical devices recalled?
Potential for the Version 2 reprocessor connecting tube lock levers may fail prematurely. Potential for the Version 2 reprocessor connecting tube lock levers may fail prematurely.
How do I know if I have the recalled product?
Match the codes printed on your package against the notice: lot code 09A, 0XA, 0YA. If the code on your package is not on that list, your unit is outside the recall.
What should I do with it right now?
Match the model, catalogue, lot and serial numbers on your device against the identifiers on this page.
Can I get my money back?
If a clinic fitted or supplied the device, start there — they hold the serial-number records the manufacturer needs.
Where was the recalled product sold?
It was distributed nationwide.
Related recalls
-
Class II · 18 days ago
Olympus M3 Gold Autoclavable Foroblique Telescope 30 recall: There are identified discrepancies between the sterilization parameters
There are identified discrepancies between the sterilization parameters listed in the Instructions for Use and the sterilization parameters listed in…
-
Class II · 18 days ago
Olympus Tripp-Lite P580-025 25ft DisplayPort Cable recall: While in the high-power operating mode, a video dropout/blackout may occur
While in the high-power operating mode, a video dropout/blackout may occur when using a particular accessory cable.
-
Class II · 18 days ago
Olympus M3 Gold Autoclavable Lateral Telescope 70 recall: There are identified discrepancies between the sterilization parameters
There are identified discrepancies between the sterilization parameters listed in the Instructions for Use and the sterilization parameters listed in…
-
Class II · 25 days ago
Olympus BiCOAG Hemostasis Probe 7Fr Fixed Pin Connector. Model/ recall: Potential for detachment of ceramic tip due to manufacturing without
Potential for detachment of ceramic tip due to manufacturing without the designated amount of adhesive.
-
Class II · 25 days ago
Olympus BiCOAG Hemostasis Probe 10Fr Coaxial Connector. Model/ recall: Potential for detachment of ceramic tip due to manufacturing without
Potential for detachment of ceramic tip due to manufacturing without the designated amount of adhesive.
-
Class II · 25 days ago
Olympus EZDilate Endoscopic Balloon Dilator Wired-guided 11, 12, 13mm recall: Potential for the inflation chart label affixed to the shaft of the device
Potential for the inflation chart label affixed to the shaft of the device to be incorrect and indicate a balloon diameter of 18, 19, or 20 mm,