Merit Medical Systems, Inc. Philips Bridge Prep Kit REF: K12-09098B Sterile EO recall: catheter may experience resistance when being advanced over the guidewire
catheter may experience resistance when being advanced over the guidewire
The hazard: Sterility or particulate concern
This recall is about sterility assurance. It does not mean every unit is contaminated — it means the manufacturer cannot demonstrate that none of them is.
What the notice says: catheter may experience resistance when being advanced over the guidewire
Why it matters: The product was made or packaged in conditions that cannot assure sterility, or visible particles were found in it. For anything injected, infused or used in the eye, that is a direct route for contamination into the body.
Symptoms and when to call a doctor
Watch for fever, chills, pain, redness, swelling or discharge at an injection site, and for a red, painful or suddenly blurred eye after using an eye product. Any of these needs same-day medical attention. Do not wait to see whether it settles, and tell the clinician which product and lot you used so it can be reported against the recall.
This page is general information, not medical advice. If you feel unwell, a clinician who can see you is the only person able to judge your case.
Recall details
- Recall number
- Z-2002-2026
- Published
- May 6, 2026
- Risk level
- Class II
- Status
- Ongoing
- Issued by
- U.S. Food and Drug Administration
- Brand
- Merit Medical Systems, Inc.
- Product type
- Medical devices
- Distribution
- Nationwide
- Made in
- United States
- Lot / code info
- All Lot Numbers/UDI: 00884450771310
- UPC codes
- 00884450771310
Products covered by this recall
Philips Bridge Prep Kit REF: K12-09098B Sterile EO, Rx ONLY
Check your product
The notice names 4 codes you can read straight off the package. Type the one printed on yours and the list below narrows to it.
UPC / barcode
Read the twelve digits under the barcode on the package.
- 00884450771310
Lot or batch code
Usually ink-stamped near the seam, the cap or the bottom of the pack.
- UDI
Model or item number
On the rating label, the box or the instruction sheet.
- K12-09098B Sterile EO
- UD
Codes are lifted verbatim from the FDA — Device enforcement notice. A code that is missing here may still be covered — the official notice is the complete list.
What to do about Sterility
Merit Medical Systems, Inc. — This recall is about sterility assurance. It does not mean every unit is contaminated — it means the manufacturer cannot demonstrate that none of them is.
- Stop using the affected lot and check the lot number on your own carton or vial against the codes listed above.
- Do not use a vial or syringe with visible particles, cloudiness or discolouration, whether or not it is on the recall list.
- Call your prescriber or pharmacy today about a replacement from an unaffected lot — do not simply skip doses of a medicine you depend on.
- If you are a clinic or pharmacy, quarantine the stock and work it through your usual recall log.
Refunds and replacements
With medicines, a replacement supply matters more than cash, and that is what pharmacies are set up to provide.
- Ask the dispensing pharmacy for a like-for-like replacement from an unaffected lot. This is the fastest route and usually costs nothing.
- For a mail-order or online pharmacy, use the recall line listed on this page rather than the general support queue.
- If the recall voided a fill you had already paid for, your insurer will normally authorise a replacement ahead of schedule. Quote the recall number.
- If you paid out of pocket, ask for a refund of the co-pay or purchase price and keep the receipt the pharmacy issues.
Company contact: Merit Medical Systems, Inc. — 1600 W Merit Pkwy, South Jordan, UT, 84095-2416
The official notice
This page summarises a notice published by U.S. Food and Drug Administration. The agency notice is the authoritative version — read it before you act, and treat it as the final word if anything here looks different.
Open the FDA — Device enforcement record U.S. Food and Drug Administration recalls
Questions people ask about this recall
Why was Merit Medical Systems, Inc. medical devices recalled?
catheter may experience resistance when being advanced over the guidewire catheter may experience resistance when being advanced over the guidewire
How do I know if I have the recalled product?
Match the codes printed on your package against the notice: UPC 00884450771310; lot code UDI; model number K12-09098B Sterile EO, UD. If the code on your package is not on that list, your unit is outside the recall.
What should I do with it right now?
Stop using the affected lot and check the lot number on your own carton or vial against the codes listed above.
Can I get my money back?
Ask the dispensing pharmacy for a like-for-like replacement from an unaffected lot. This is the fastest route and usually costs nothing.
Where was the recalled product sold?
It was distributed nationwide.
Related recalls
-
Class II · 18 days ago
Merit Medical Systems, Inc. Embosphere 500-700 micrometer 2 mL Syringe Sterile Steam recall: Microspheres used in embolization of tumors
Microspheres used in embolization of tumors, prostatic arteries, arteriovenous malformations, and blood vessels may have holes in packaging that may…
-
Class II · 4 months ago
Merit Medical Systems, Inc. Splashwire Hydrophilic Guide Wire: REF: Mswstda35150 recall: Due to unsealed portions of pouches
Due to unsealed portions of pouches.
-
Class II · 6 months ago
Merit Medical Systems, Inc. Philips Bridge Prep Kit REF: K12-09098C Sterile EO recall: catheter may experience resistance when being advanced over the guidewire
catheter may experience resistance when being advanced over the guidewire
-
Class II · 6 months ago
Merit Medical Systems, Inc. Philips Bridge Prep Kit REF: K12-09098C Sterile EO recall: catheter may experience resistance when being advanced over the guidewire
catheter may experience resistance when being advanced over the guidewire
-
Class I · 7 months ago
Merit Medical Systems, Inc. CentrosFLO Hemodialysis Catheters, REF: Cenfp15K/A recall: 16F dual-valved splittable sheath introducer due to a design defect
16F dual-valved splittable sheath introducer due to a design defect, may not split as intended, which may result in hemorrhage, foreign bodies…
-
Class I · 7 months ago
Merit Medical Systems, Inc. ProGuide Chronic Dialysis Catheters, REF: DC01455550/C recall: 16F dual-valved splittable sheath introducer due to a design defect
16F dual-valved splittable sheath introducer due to a design defect, may not split as intended, which may result in hemorrhage, foreign bodies…