Liebel-Flarsheim Company LLC Optiray Imaging Bulk Package-350, Ioversol Injection 74% recall: Presence of Particulate Matter: comprising polyethylene and other plastic
Presence of Particulate Matter: comprising polyethylene and other plastic materials, stainless steel and glass.
The hazard: Foreign material — hard plastic
The company found hard plastic in the product, or a customer did. Either way the recall covers every pack from the runs listed, because contamination of this kind is rarely confined to one unit.
What the notice says: Presence of Particulate Matter: comprising polyethylene and other plastic materials, stainless steel and glass.
Why it matters: Pieces of hard plastic may be inside the product. The risk here is physical rather than microbial: cuts to the mouth or throat, a broken tooth, or an injury further down if a fragment is swallowed.
Symptoms and when to call a doctor
If someone has swallowed a fragment and has mouth or throat pain, trouble swallowing, chest or stomach pain, vomiting, or blood in saliva or stool, they should be seen the same day. A fragment swallowed without symptoms usually passes on its own, but tell the clinician exactly what the product was: most plastics are invisible on a plain X-ray, so the history you give is what the decision rests on.
This page is general information, not medical advice. If you feel unwell, a clinician who can see you is the only person able to judge your case.
Recall details
- Recall number
- D-0773-2026
- Published
- August 19, 2026
- Risk level
- Class I
- Status
- Ongoing
- Issued by
- U.S. Food and Drug Administration
- Brand
- Liebel-Flarsheim Company LLC
- Product type
- Prescription & OTC drugs
- Units affected
- 3,486 500mL-vials
- Distribution
- Nationwide
- Made in
- United States
- Lot / code info
- Lot # 25ZF3670, Exp Date: May 31, 2027.
Products covered by this recall
Optiray Imaging Bulk Package-350, Ioversol Injection 74%, 350 mg/mL Organically Bound Iodine, 500 mL Multiple-Dose Vial, Rx only, Sterile Solution, Manufactured by: Liebel-Flarsheim Company LLC, Raleigh, NC 27616, Made in USA, NDC 0019-1333-65.
Check your product
The notice names 7 codes you can read straight off the package. Type the one printed on yours and the list below narrows to it.
Lot or batch code
Usually ink-stamped near the seam, the cap or the bottom of the pack.
- 25ZF3670
Best-by / use-by date
Printed beside the lot code, not on the price sticker.
- May 31
- 2027. — 3
- 486 500mL-vials
NDC number
On the carton and again on the bottle or blister label.
- 0019-1333-65
Package size
Match the net weight or the piece count on the front of the pack.
- 350 mg
- 500 mL
Codes are lifted verbatim from the FDA — Drug enforcement notice. A code that is missing here may still be covered — the official notice is the complete list.
What to do about Plastic pieces
Liebel-Flarsheim Company LLC — The company found hard plastic in the product, or a customer did. Either way the recall covers every pack from the runs listed, because contamination of this kind is rarely confined to one unit.
- Stop eating it, and do not pick through it to find the fragment — sorting it by hand is how people get cut.
- Check the freezer and the pantry for other packs carrying the same codes before you consider the matter closed.
- If someone has already bitten into something hard, have them stop, spit out what is in their mouth and rinse rather than swallow.
- Keep the pack if you can. If anyone was hurt, the fragment and the packaging together are the evidence that matters.
Refunds, and what else you can claim
The purchase price is the floor, not the ceiling. Where a recall caused you a real cost, say so.
- Claim the refund at the store first; it is the fastest route and needs the least paperwork.
- If you bought several packs over time, list them. Firms routinely settle for more than a single unit when a customer asks.
- Medical costs, lost earnings or a spoiled event are not handled at the service desk. Write to the company contact on this page instead, with dates and documents.
- Keep copies of everything you send. If a recall caused harm, that file is what any later claim rests on.
Company contact: Liebel-Flarsheim Company LLC — 8800 Durant Rd, Raleigh, NC, 27616-3104
The official notice
This page summarises a notice published by U.S. Food and Drug Administration. The agency notice is the authoritative version — read it before you act, and treat it as the final word if anything here looks different.
Open the FDA — Drug enforcement record U.S. Food and Drug Administration recalls
Questions people ask about this recall
Why was Liebel-Flarsheim Company LLC prescription & otc drugs recalled?
Presence of Particulate Matter: comprising polyethylene and other plastic materials, stainless steel and glass. Presence of Particulate Matter: comprising polyethylene and other plastic materials, stainless steel and glass.
How do I know if I have the recalled product?
Match the codes printed on your package against the notice: lot code 25ZF3670; best-by date May 31 or 2027. — 3. If the code on your package is not on that list, your unit is outside the recall.
What should I do with it right now?
Stop eating it, and do not pick through it to find the fragment — sorting it by hand is how people get cut.
Can I get my money back?
Claim the refund at the store first; it is the fastest route and needs the least paperwork.
Where was the recalled product sold?
It was distributed nationwide.
Related recalls
-
Class II · 11 days ago
K.C. Pharmaceuticals, Inc. Sterile Lubricant Dry Eye Relief Eye Drops, 0.5 FL OZ recall: Lack of Assurance of Sterility
Lack of Assurance of Sterility
-
Class II · 11 days ago
Carolina Infusion, LLC Quad-Mix Injectable, Packaged in single-use dosage syringes recall: Lack of Assurance of Sterility: Related to processing equipment used
Lack of Assurance of Sterility: Related to processing equipment used in compounded product.
-
Class II · 11 days ago
Carolina Infusion, LLC Tirzepatide/Cyanocobalamin 26/2 MG/ML Injectable recall: Lack of Assurance of Sterility: Related to formulation using bacteriostic
Lack of Assurance of Sterility: Related to formulation using bacteriostic water; Related to processing equipment used in compounded product.
-
Class II · 11 days ago
Carolina Infusion, LLC Tri-MIX ,30/1/20, injectable recall: Lack of Assurance of Sterility: Related to processing equipment used
Lack of Assurance of Sterility: Related to processing equipment used in compounded product.
-
Class II · 11 days ago
Carolina Infusion, LLC Tri-MIX ,30/1/10, injectable recall: Lack of Assurance of Sterility: Related to processing equipment used
Lack of Assurance of Sterility: Related to processing equipment used in compounded product.
-
Class II · 11 days ago
Carolina Infusion, LLC Tri-MIX ,30/1/60, injectable recall: Lack of Assurance of Sterility: Related to processing equipment used
Lack of Assurance of Sterility: Related to processing equipment used in compounded product.