Class II U.S. Food and Drug Administration

CooperVision, Inc. Sofmed Breathables, contact lens recall: One lot manufactured with an invalid sterilization cycle

Recall published 1+ years ago

One lot manufactured with an invalid sterilization cycle.

The hazard: Sterility or particulate concern

This recall is about sterility assurance. It does not mean every unit is contaminated — it means the manufacturer cannot demonstrate that none of them is.

What the notice says: One lot manufactured with an invalid sterilization cycle.

Why it matters: The product was made or packaged in conditions that cannot assure sterility, or visible particles were found in it. For anything injected, infused or used in the eye, that is a direct route for contamination into the body.

Symptoms and when to call a doctor

Watch for fever, chills, pain, redness, swelling or discharge at an injection site, and for a red, painful or suddenly blurred eye after using an eye product. Any of these needs same-day medical attention. Do not wait to see whether it settles, and tell the clinician which product and lot you used so it can be reported against the recall.

This page is general information, not medical advice. If you feel unwell, a clinician who can see you is the only person able to judge your case.

Recall details

Recall number
Z-2607-2025
Published
October 1, 2025
Risk level
Class II
Status
Ongoing
Issued by
U.S. Food and Drug Administration
Brand
CooperVision, Inc.
Product type
Medical devices
Units affected
180 units
Distribution
Nationwide
Made in
United States
Lot / code info
Carton Lot Number: 20735504301008. Blister Lot Number: 6450505898

Products covered by this recall

Sofmed Breathables, (stenfilcon A) contact lens. Model Number: Softmed Breathables. 54% water content, Toric, cast moulded Silicone Hydrogel, In-monomer tinted, contact lens, for Daily Disposable Wear. Blister packaged.

Check your product

The notice names 1 code you can read straight off the package. Type the one printed on yours and the list below narrows to it.

Model or item number

On the rating label, the box or the instruction sheet.

  • Softmed Breathables. 54

Codes are lifted verbatim from the FDA — Device enforcement notice. A code that is missing here may still be covered — the official notice is the complete list.

What to do about Sterility

CooperVision, Inc. — This recall is about sterility assurance. It does not mean every unit is contaminated — it means the manufacturer cannot demonstrate that none of them is.

  1. Stop using the affected lot and check the lot number on your own carton or vial against the codes listed above.
  2. Do not use a vial or syringe with visible particles, cloudiness or discolouration, whether or not it is on the recall list.
  3. Call your prescriber or pharmacy today about a replacement from an unaffected lot — do not simply skip doses of a medicine you depend on.
  4. If you are a clinic or pharmacy, quarantine the stock and work it through your usual recall log.

Refunds and replacements

With medicines, a replacement supply matters more than cash, and that is what pharmacies are set up to provide.

  • Ask the dispensing pharmacy for a like-for-like replacement from an unaffected lot. This is the fastest route and usually costs nothing.
  • For a mail-order or online pharmacy, use the recall line listed on this page rather than the general support queue.
  • If the recall voided a fill you had already paid for, your insurer will normally authorise a replacement ahead of schedule. Quote the recall number.
  • If you paid out of pocket, ask for a refund of the co-pay or purchase price and keep the receipt the pharmacy issues.

Company contact: CooperVision, Inc. — 180 Thruway Park Dr, West Henrietta, NY, 14586-9798

The official notice

This page summarises a notice published by U.S. Food and Drug Administration. The agency notice is the authoritative version — read it before you act, and treat it as the final word if anything here looks different.

Open the FDA — Device enforcement record U.S. Food and Drug Administration recalls

Questions people ask about this recall

Why was CooperVision, Inc. medical devices recalled?

One lot manufactured with an invalid sterilization cycle. One lot manufactured with an invalid sterilization cycle.

How do I know if I have the recalled product?

Match the codes printed on your package against the notice: model number Softmed Breathables. 54. If the code on your package is not on that list, your unit is outside the recall.

What should I do with it right now?

Stop using the affected lot and check the lot number on your own carton or vial against the codes listed above.

Can I get my money back?

Ask the dispensing pharmacy for a like-for-like replacement from an unaffected lot. This is the fastest route and usually costs nothing.

Where was the recalled product sold?

It was distributed nationwide.

Related recalls