Biomet, Inc. Intramedullary Bone Saw Blade Assembly Model/ recall: Zimmer Biomet is conducting a medical device recall removal for various sizes
Zimmer Biomet is conducting a medical device recall removal for various sizes of the Intramedullary Bone Saw Blade Assembly due to potential sterile barrier packaging damage caused by an exposed saw blade.
The hazard: Sterility or particulate concern
The concern here is contamination of a product that bypasses the body’s normal defences, which is why the threshold for recalling it is low.
What the notice says: Zimmer Biomet is conducting a medical device recall removal for various sizes of the Intramedullary Bone Saw Blade Assembly due to potential sterile barrier packaging damage caused by an exposed saw blade.
Why it matters: The product was made or packaged in conditions that cannot assure sterility, or visible particles were found in it. For anything injected, infused or used in the eye, that is a direct route for contamination into the body.
Symptoms and when to call a doctor
Watch for fever, chills, pain, redness, swelling or discharge at an injection site, and for a red, painful or suddenly blurred eye after using an eye product. Any of these needs same-day medical attention. Do not wait to see whether it settles, and tell the clinician which product and lot you used so it can be reported against the recall.
This page is general information, not medical advice. If you feel unwell, a clinician who can see you is the only person able to judge your case.
Recall details
- Recall number
- Z-2868-2026
- Published
- August 12, 2026
- Risk level
- Class II
- Status
- Ongoing
- Issued by
- U.S. Food and Drug Administration
- Brand
- Biomet, Inc.
- Product type
- Medical devices
- Units affected
- 12
- Made in
- United States
- Lot / code info
- UDI-DI (01)00887868507809(17)360228(10)67818772; Lot 67818772
- UPC codes
- 00887868507809
Products covered by this recall
Intramedullary Bone Saw Blade Assembly Model/Catalog Number: 475625 Product Description: Intramedullary Bone Saw Blade Assembly 13mm
Check your product
The notice names 2 codes you can read straight off the package. Type the one printed on yours and the list below narrows to it.
UPC / barcode
Read the twelve digits under the barcode on the package.
- 00887868507809
Lot or batch code
Usually ink-stamped near the seam, the cap or the bottom of the pack.
- 67818772 — 12
Codes are lifted verbatim from the FDA — Device enforcement notice. A code that is missing here may still be covered — the official notice is the complete list.
What to do about Sterility
Biomet, Inc. — The concern here is contamination of a product that bypasses the body’s normal defences, which is why the threshold for recalling it is low.
- Stop using the affected lot and check the lot number on your own carton or vial against the codes listed above.
- If you are a clinic or pharmacy, quarantine the stock and work it through your usual recall log.
- Report any infection or reaction you think the product caused to FDA MedWatch.
- Do not use a vial or syringe with visible particles, cloudiness or discolouration, whether or not it is on the recall list.
Getting a replacement supply
Do not let a refund question interrupt your treatment. Deal with the supply first and the money second.
- Call the pharmacy before you run low. They can see which lot they dispensed to you and will usually swap it the same day.
- Insurers do not normally count a recall replacement against a refill limit. If one is refused, ask the pharmacist to call it through as a recall override.
- Over-the-counter products are refunded at the till like any other purchase; the recall notice on your phone is enough to explain the return.
- If the manufacturer runs a direct reimbursement form, it will be linked from the official notice on this page.
Company contact: Biomet, Inc. — 56 E Bell Dr, Warsaw, IN, 46582-6989
The official notice
This page summarises a notice published by U.S. Food and Drug Administration. The agency notice is the authoritative version — read it before you act, and treat it as the final word if anything here looks different.
Open the FDA — Device enforcement record U.S. Food and Drug Administration recalls
Questions people ask about this recall
Why was Biomet, Inc. medical devices recalled?
Zimmer Biomet is conducting a medical device recall removal for various sizes of the Intramedullary Bone Saw Blade Assembly due to potential sterile barrier packaging damage caused by an exposed saw blade. Zimmer Biomet is conducting a medical device recall removal for various sizes of the Intramedullary Bone Saw Blade Assembly due to potential sterile barrier packaging damage caused by an exposed saw blade.
How do I know if I have the recalled product?
Match the codes printed on your package against the notice: UPC 00887868507809; lot code 67818772 — 12. If the code on your package is not on that list, your unit is outside the recall.
What should I do with it right now?
Stop using the affected lot and check the lot number on your own carton or vial against the codes listed above.
Can I get my money back?
Call the pharmacy before you run low. They can see which lot they dispensed to you and will usually swap it the same day.
Related recalls
-
Class II · 2 months ago
Biomet, Inc. Intramedullary Bone Saw Blade Assembly Model/ recall: Zimmer Biomet is conducting a medical device recall removal for various sizes
Zimmer Biomet is conducting a medical device recall removal for various sizes of the Intramedullary Bone Saw Blade Assembly due to potential sterile…
-
Class II · 2 months ago
Biomet, Inc. Intramedullary Bone Saw Blade Assembly Model/ recall: Zimmer Biomet is conducting a medical device recall removal for various sizes
Zimmer Biomet is conducting a medical device recall removal for various sizes of the Intramedullary Bone Saw Blade Assembly due to potential sterile…
-
Class II · 2 months ago
Biomet, Inc. Intramedullary Bone Saw Blade Assembly Model/ recall: Zimmer Biomet is conducting a medical device recall removal for various sizes
Zimmer Biomet is conducting a medical device recall removal for various sizes of the Intramedullary Bone Saw Blade Assembly due to potential sterile…
-
Class II · 2 months ago
Biomet, Inc. Intramedullary Bone Saw Blade Assembly Model/ recall: Zimmer Biomet is conducting a medical device recall removal for various sizes
Zimmer Biomet is conducting a medical device recall removal for various sizes of the Intramedullary Bone Saw Blade Assembly due to potential sterile…
-
Class II · 12 months ago
Biomet ZipTight, Acute AC Joint Implant, Single Ziploop , Model/ recall: There is a potential for a missing slotted button assembly in one lot
There is a potential for a missing slotted button assembly in one lot of ZipTight, Acute AC Joint Implant, Single Ziploop
-
Class II · 1+ years ago
Biomet, Inc. Juggerknot Mini Soft Anchors, Model/ recall: The outer carton box label is for the JuggerKnot 1.0mm Mini products
The outer carton box label is for the JuggerKnot 1.0mm Mini products. However, the products within the carton are JuggerKnot 1.4mm Short devices.