Baxter Novum IQ Syringe Pump, Loaner recall: A software issue that may occur during a Volume/Time (VOT) multi-syringe
A software issue that may occur during a Volume/Time (VOT) multi-syringe infusion when a syringe reaches empty and is replaced while a Volume To Be Infused (VTBI) remains.
The hazard: Device malfunction
A malfunction was identified in this device. What matters most is whether your particular unit falls inside the affected model, lot or serial range.
What the notice says: A software issue that may occur during a Volume/Time (VOT) multi-syringe infusion when a syringe reaches empty and is replaced while a Volume To Be Infused (VTBI) remains.
Why it matters: The device may not perform as intended — a mechanical failure, a software defect, an inaccurate reading, or an alarm that does not sound. For a device someone depends on, the consequence of the failure is usually worse than the failure itself.
Symptoms and when to call a doctor
If the device supports a vital function, do not disable or remove it on your own judgement. Contact the clinician who prescribed or fitted it, and use the back-up arrangement they gave you. Go to an emergency department if the symptoms the device is meant to manage are getting worse, or if an implanted device gives an unexpected alarm or shock.
This page is general information, not medical advice. If you feel unwell, a clinician who can see you is the only person able to judge your case.
Recall details
- Recall number
- Z-3066-2026
- Published
- September 9, 2026
- Risk level
- Class II
- Status
- Ongoing
- Issued by
- U.S. Food and Drug Administration
- Brand
- Baxter Healthcare Corporation
- Product type
- Medical devices
- Units affected
- 4 units
- Distribution
- Nationwide
- Made in
- United States
- Lot / code info
- UDI-DI 00197886002300, all serial numbers
- UPC codes
- 00197886002300
Products covered by this recall
Baxter Novum IQ Syringe Pump, Loaner, Model Number 40800BAXUSL
Check your product
The notice names 3 codes you can read straight off the package. Type the one printed on yours and the list below narrows to it.
UPC / barcode
Read the twelve digits under the barcode on the package.
- 00197886002300
Model or item number
On the rating label, the box or the instruction sheet.
- 40800BAXUSL — UDI-DI 00197886002300
Serial number
On the rating plate, often next to the date of manufacture.
- s — 4 units
Codes are lifted verbatim from the FDA — Device enforcement notice. A code that is missing here may still be covered — the official notice is the complete list.
What to do about Malfunction
Baxter Healthcare Corporation — A malfunction was identified in this device. What matters most is whether your particular unit falls inside the affected model, lot or serial range.
- Match the model, catalogue, lot and serial numbers on your device against the identifiers listed on this page.
- If the device is implanted, or you depend on it daily, speak to your clinician before changing anything about how you use it.
- Check whether the remedy is a software update, and if so confirm afterwards in the device menu that the version actually changed.
- If you are a clinic or facility, quarantine affected stock and record the correction in your recall log.
Who pays for a device recall
The manufacturer funds the remedy. The practical question is usually which link in the chain executes it.
- If a clinic fitted or supplied the device, start there — they hold the serial-number records the manufacturer needs.
- Ask for written confirmation that the remedy was applied to your serial number. That is what an insurer or a future clinician will want to see.
- If you bought it yourself online or from a pharmacy, go to the manufacturer’s recall page rather than the retailer; device claims are handled centrally.
- Where the remedy is a software update, there is nothing to claim, but do confirm the version changed afterwards.
Company contact: Baxter Healthcare Corporation — 1 Baxter Pkwy, Deerfield, IL, 60015-4625
The official notice
This page summarises a notice published by U.S. Food and Drug Administration. The agency notice is the authoritative version — read it before you act, and treat it as the final word if anything here looks different.
Open the FDA — Device enforcement record U.S. Food and Drug Administration recalls
Questions people ask about this recall
Why was Baxter Healthcare Corporation medical devices recalled?
A software issue that may occur during a Volume/Time (VOT) multi-syringe infusion when a syringe reaches empty and is replaced while a Volume To Be Infused (VTBI) remains. A software issue that may occur during a Volume/Time (VOT) multi-syringe infusion when a syringe reaches empty and is replaced while a Volume To Be Infused (VTBI) remains.
How do I know if I have the recalled product?
Match the codes printed on your package against the notice: UPC 00197886002300; model number 40800BAXUSL — UDI-DI 00197886002300. If the code on your package is not on that list, your unit is outside the recall.
What should I do with it right now?
Match the model, catalogue, lot and serial numbers on your device against the identifiers listed on this page.
Can I get my money back?
If a clinic fitted or supplied the device, start there — they hold the serial-number records the manufacturer needs.
Where was the recalled product sold?
It was distributed nationwide.
Related recalls
-
Class II · 25 days ago
Baxter Healthcare Corporation PRO+ 40" MRS Surface recall: There is an error in the product description on the Unique Device
There is an error in the product description on the Unique Device Identification (UDI) label. These discrepancies in labeling do not align with the…
-
Class II · 25 days ago
Baxter Healthcare Corporation Brand Name: Volara System Product Name: Volara, HC recall: Contamination within the release test equipment flow path could have affected
Contamination within the release test equipment flow path could have affected the accuracy of the nebulizer flow rate. Affected devices returned to…
-
Class II · 25 days ago
Baxter Healthcare Corporation PRO+ MRS Surface FOR Versacare recall: There is an error in the product description on the Unique Device
There is an error in the product description on the Unique Device Identification (UDI) label. These discrepancies in labeling do not align with the…
-
Class II · 25 days ago
Baxter Healthcare Corporation PRO+ 36" MRS Surface recall: There is an error in the product description on the Unique Device
There is an error in the product description on the Unique Device Identification (UDI) label. These discrepancies in labeling do not align with the…
-
Class I · last month
Baxter Healthcare Corporation Dextrose Injection, USP, 70 %, 2000 mL bags recall: Presence of Particulate Matter: particulate matter identified as stainless
Presence of Particulate Matter: particulate matter identified as stainless steel particles in the solution.
-
Class II · last month
Baxter Healthcare Corporation Clindamycin Injection USP in 5% Dextrose recall: CGMP Deviations
CGMP Deviations