3M Company Scotch™ Thermal Laminators recall: Risk of Serious Injury or Death from Fire Hazard
Risk of Serious Injury or Death from Fire Hazard

The hazard: Fire or burn hazard
This product can overheat or catch fire, which is why the instruction is to unplug and stop using it rather than to keep an eye on it.
What the notice says: The recalled thermal laminators can overheat, posing a fire hazard.
Why it matters: The product can overheat, ignite or cause a burn. Where lithium batteries are involved the failure is fast and very hot, and water does not put it out quickly.
Symptoms and when to call a doctor
Treat a burn by cooling it under running water for about 20 minutes — not with ice, butter or ointment — and cover it loosely with a clean non-fluffy cloth. Get medical help for burns that are larger than the person’s palm, that are deep or white or charred, that involve the face, hands, feet or genitals, or any burn to a baby or young child. If someone has inhaled smoke and is coughing, hoarse or short of breath, call 911.
This page is general information, not medical advice. If you feel unwell, a clinician who can see you is the only person able to judge your case.
Recall details
- Recall number
- 11022
- Published
- October 15, 2026
- Risk level
- CPSC recall
- Status
- Active recall
- Issued by
- U.S. Consumer Product Safety Commission
- Brand
- 3M Company
- Product type
- Business and Office Machines
- Units affected
- About 53,634
- Sold at
- Amazon
- Made in
- China
- Reports of harm
- The firm has received 63 reports of the laminators smoking, melting and overheating, including five reports of the laminators catching fire and one report of minor property damage. No injuries have been reported.
Products covered by this recall
This recall involves the Scotch™ thermal laminator, model number TL1302Z. The laminator is light gray/white with gray accents and the word "Scotch" is printed in gray on the front. The laminating slot is approximately 13 inches wide, and the machine has a carrying handle on the right side of the machine when viewing from the front. The model number TL1302Z is located on the sticker on the bottom of the laminator and can also be found on the product packaging.
What to do about Fire
3M Company — This product can overheat or catch fire, which is why the instruction is to unplug and stop using it rather than to keep an eye on it.
- Stop using it and unplug it from the wall. If it runs on a battery pack, stop charging it.
- Move it off anything that burns — a bed, a sofa, a carpet, a pile of paper — and away from exits.
- Do not leave it charging overnight or while the house is empty while you wait for the remedy.
- If it has already overheated, scorched or swelled, do not keep using it and do not try to repair it.
Claiming your refund, repair or replacement
The recalling company decides the remedy and funds it. You should never pay for a recall repair or for return shipping.
- Use the company contact on this page first. Most firms run a dedicated recall page with a claim form that is far quicker than their main support line.
- If the company stops responding, escalate to the CPSC. Firms under a recall order have reporting duties to the agency.
- Have the model number, the date code and your photos ready. Many companies issue store credit by default — ask for cash or a card reversal if you would rather have it.
- No receipt? Say so. Recall refunds are routinely paid without proof of purchase, because the hazard is what triggers the obligation.
Remedy named in the notice: Consumers should stop using and unplug the recalled thermal laminators immediately and contact 3M Company to receive a full refund. Consumers will be asked to fill out the online recall registration form at https://www.scotchbrand.com/3M/en_US/scotch-brand/tl1302Z-laminator-recall/, confirm that their laminator is included in the recall and upload a photograph of the laminator with the unplugged power cord cut. The refund, in the form of a check, will be mailed to the consumer upon receipt of the completed form and confirmation that the laminator's power cord has been cut. Consumers should dispose of the recalled laminator in accordance with local and state laws governing electronics recycling.
Company contact: 3M Company toll-free at 800-772-4337 from 8 a.m. to 4:30 p.m. CT Monday through Friday, online at https://www.scotchbrand.com/3M/en_US/scotch-brand/tl1302Z-laminator-recall/ or www.scotchbrand.com and click on "Recall Information" at the top of the page for more information.
The official notice
This page summarises a notice published by U.S. Consumer Product Safety Commission. The agency notice is the authoritative version — read it before you act, and treat it as the final word if anything here looks different.
Open the CPSC — Consumer Product Safety Commission record U.S. Consumer Product Safety Commission recalls
Questions people ask about this recall
Why was 3M Company business and office machines recalled?
Risk of Serious Injury or Death from Fire Hazard The recalled thermal laminators can overheat, posing a fire hazard.
How do I know if I have the recalled product?
The notice does not publish package codes for this recall. Compare the product name, size and the purchase window against the official CPSC — Consumer Product Safety Commission record, and contact the company if you are unsure.
What should I do with it right now?
Stop using it and unplug it from the wall. If it runs on a battery pack, stop charging it.
Can I get my money back?
The notice says: Consumers should stop using and unplug the recalled thermal laminators immediately and contact 3M Company to receive a full refund. Consumers will be asked to fill out the online recall registration form at https://www.scotchbrand.com/3M/en_US/scotch-brand/tl1302Z-laminator-recall/, confirm that their laminator is included in the recall and upload a photograph of the laminator with the unplugged power cord cut. The refund, in the form of a check, will be mailed to the consumer…
Related recalls
-
Highest risk · 1+ years ago
3M Company Thermal Laminators recall: Overheating
Overheating
-
Class I · 1+ years ago
3M Company 3M Ranger Blood/Fluid Warming High Flow Set Catalog Numbers 24355, 24370 recall: Field action to clarify the flow rates and inlet fluid temperatures
Field action to clarify the flow rates and inlet fluid temperatures, along with location of the outlet temperature for Ranger Blood/Fluid Warming…
-
Highest risk · 3 days ago
Bamamon LED Projecting Finger Light Toys recall: Risk of Serious Injury or Death from Battery Ingestion
Risk of Serious Injury or Death from Battery Ingestion; Violate Mandatory Standard for Toys
-
Highest risk · 3 days ago
Costway Convertible High Chairs recall: Risk of Serious Injury or Death from Entrapment and Fall Hazards
Risk of Serious Injury or Death from Entrapment and Fall Hazards; Violate Mandatory Standard for High Chairs
-
Highest risk · 3 days ago
FoShanShiNanHaiQuNuoAiTongZhuangShangHang CIYTI Light-Up Princess Costumes recall: Risk of Serious Injury or Death from Battery Ingestion
Risk of Serious Injury or Death from Battery Ingestion; Violate Mandatory Standard for Toys
-
Highest risk · 3 days ago
Lithonia Lighting RSX Luminaires with Adjustable Tilt Arm Mountings recall: Risk of Serious Injury from Impact Hazard
Risk of Serious Injury from Impact Hazard